Connect with us

How To Get The Target Security Tag Off?


How To Get The Target Security Tag Off?

You understand how annoying it can be if you’ve ever bought something from a store only to discover that the security tag is still on. The tag is bothersome, and if you attempt to leave the store with it still on, it may set off alarms. To save you any hassles, we’ll demonstrate how to remove a security tag in this article.

I used the self-checkout and bought a hoodie for $24. Never even considered looking for a security tag, but once I got home, I did.

I looked into a few safe techniques to remove Target security tags since I wanted to avoid going back to the store.

Here’s what I found to be effective: I made a gap by pulling the garment to one side of the security tag, then inserted a large flathead screwdriver inside.

I then repeatedly turned the flathead screwdriver until the security tag could be removed.

Security Tag Conditions

There are several situations in which you might need to take a security tag off. Perhaps you need to return something, but the shop doesn’t have a detacher available. Or perhaps you bought something and then realized you forgot to take the tag off, so you need to do that before you leave the store. Whatever the cause, removing a security tag yourself only requires a few basic tools.

We’ve compiled a thorough list of easy ways to get rid of them, whether they are ink or magnetic security tags.

To find a solution that will work for you, keep reading.

Have You Ever Purchased A Brand-New Item, Taken It Home, And Then Discovered That The Cashier Neglected To Take Off The Target Security Tag?

If you are reading this, it is likely that you made a purchase and left the store with it still wearing the red Target security tag. Thank goodness, a security tag can be removed independently.

We’ll talk about how to delete target security tags on your own in this article, but first, let’s define a target security tag.

Target Security Tag: What Is It?

Stores utilize target security tags as a way to lower theft. It’s crucial to distinguish this tag from the more typical price tag. Typically, they are fastened to clothing and other goods.

Security tags that are designated for use with target products are known as target security tags. Potential thieves are less likely to find them because these tags are typically smaller than regular security tags.

security tag

However, They Are Equally Effective At Deterring Theft

The target sells a special that may be used to remove these tags. This tool can be used to remove the tag without harming the item in any way. These items can be removed from the store without setting off any alarms once the tag has been removed.

Taking Off The Target Security Tag

Many customers suffer from Target security tags, but getting rid of them doesn’t have to be difficult. There are several methods available to remove these bothersome tags without ruining your garment.

Here’s how to quickly get rid of those bothersome items so you can get back to shopping!

1. Pliers Atlantic Ride Pair

The most typical method of using pliers is to hold up one side of the tag while pulling with the other.

When you snap the metal wire joining the two sides, this releases its hold on your clothing, allowing you to dispose of it however you see fit.

2. String

If for some reason pliers don’t work or if there isn’t any nearby metal wire, you might try using a string. To begin, all you need is a lengthy piece of string.

One end of the string needs to be held while the other end is wrapped around the tag. To complete the operation, just tug on the thread until the tag pops off.

Just be careful not to tug too hard on the tag or you run the danger of ripping your clothes.

3. A Screwdriver

Although it is another quick and easy approach, employing scissors is more secure. All that is needed to pry the tag off is a tiny screwdriver or anything else that will fit into the hole in the tag. Just be mindful to avoid tripping and risking clothes damage.

4. Shears

Although it’s probably the simplest method, it’s more probable that you’ll damage yourself or your clothing if you remove a security tag in this manner.



Simply cutting through the tag’s plastic portion—not the metal wires—will remove it. Just proceed with utmost caution to prevent slipping and harming yourself or your clothing.

security tags

5. A magnet To Remove Tags

This method is perhaps the quickest and easiest way to remove a security tag, but it also costs the most money. Simply purchase a magnetic tag remover, place it against the tag, and pull it off.

The tag will become less attached to your clothing thanks to the magnet, making it easier for you to remove and dispose of.

Nail File 6

This is typically the safest way to remove a security tag, albeit it could take a little longer than the other approaches.

All you have to do is fill the plastic portion of the tag until it is thin enough to break off. It could take some time, but doing is worth it if you don’t want to risk spoiling your clothes.

Seven. Needle-nose pliers

Although this approach is quick and easy, utilizing scissors is more secure. Finding a pair of needle tip pliers and using them to pop open the tag are all that are required to remove the tag. Just be careful to avoid slipping and harming your clothing in the process.

Eight. Safety Pin

Although this approach is quick and easy, utilizing scissors is more secure. All that is required is to just grab a safety pin and rip the tag off with it. It could take some time, but it’s worth it to take the possibility of damaging your clothes.

To remove the security tag, insert the pin inside of it and twist. Be extremely careful to prevent yourself from getting harmed.

9. Speculums

This is typically the safest technique to remove a security tag, even if it could take a little longer than the other approaches.

The tiny metal wires holding the tag in place can easily be removed by finding a pair of tweezers and using them. Just be careful you should not to rip or tear your clothes while doing it.

The ten rubber bands


Wrap the pin of the security tag with a rubber band. The rubber band should be large and thick enough to be sturdy while still being small enough to go around the pin. This will enable the pin to release.

Hold the tag in place with one hand while removing the pin with the other. The pins’ pressure should be sufficient to cause the pin to finally pop open or to separate easily from the remainder of the tag.

How Can I Remove The Security Tags From a Target’s Clothes?

By rubbing the tag, you can remove security tags from target apparel.

First, use your fingers to repeatedly remove the tag away from the clothing. Repeat this procedure ten or more times until the pin begins to loosen.

‣ then look for a large nail. The nail should be larger than the tag and have a head at least as wide as a cent.

‣ The clothing’s tag should be removed. Keep the lengthy plastic portion of the tag aside.

Press down on the ink cartridge until it pops up to be opened. To get the ink cartridge to break open, continuously strike it down without using too much force.

Alternatively, you can do this by firmly applying an electromagnet.

Instead of an ink bag, many modern tags include an electromagnet; if you crack one open, you’ll see that there is no ink inside.

‣ Put something between the tag and the pin head to give it some room to move in order to remove the tag.

Next, bend the pin back and forth to break it.

Then, pull the tag straight back, letting the pin come out of the hole it was inserted in.

You may finally cut the tag open.

How Can Security Tags Be Disabled?

Security labels are typically deactivated using a deactivator that is built into the scanner or situated at the point of sale.

The deactivator prevents a label from sending a signal and enables it to pass close to an antenna without setting off an alarm by disrupting a circuit within the label.

The magnetic security strip can be rendered useless by simply magnetizing it throughout its whole length.

By producing a magnetic field that is sufficiently powerful along the strip’s length, this can be accomplished.

A Round Security Tag: How Do I Take It Off?

Use rubber bands to remove a circular security tag.

First, set the ink cartridge for the tag on its side. It is located on the spherical portion of the tag, which is on the opposite side of the pin.

When you’re finished, remove the tag-containing portion of the garment from the rest of it.

Move the sensor as far away as you can if it breaks, to lessen the amount of damage the ink causes to the clothing.

Step1: Security

After that, secure the pin of the security tag with a rubber band.

The rubber band must be big and sturdy enough to support the pin while still being flexible enough to wrap around it. This will cause the pin to loosen.

Hold the larger portion of the ink tag in one hand.

Next, take out the pin with the opposite hand.

The pressure from the pins should be enough to either pop the pin off or just pull it away from the rest of the tag.

If one rubber band was insufficient to sufficiently release the tag, try several.

Several techniques can be used to take a security tag off of clothing. There are a few additional techniques, but the most typical ones are using a pair of pliers or scissors. Here are several approaches to getting rid of a security tag and what each one entails:

Utilizing pliers: This is the most popular and simple way. Just grab a pair of pliers and firmly grasp the security tag. The tag’s pin should then pop out as you continue to twist the pliers. The tag ought to just peel off once the pin is removed.

Using scissors: This technique is comparable to using pliers, but you will need to cut the security tag off rather than twist it off. The security tag can be cut off by inserting the blade of the scissors between its prongs and applying pressure until it snaps.

Step 2: Comply With The Guidelines.

The next step is to adhere to the directions on the security tag if it is still attached to the article of clothing. The tag will have a phone number that has to be dialed. You will receive a code from the customer support agent to deactivate the tag. Once you get the code, press the tag’s button while keeping it depressed to enter the code. The clothing item’s tag should then beep and detach.

security tags

Step 3: Take Your Time.

It’s crucial to wait after removing the security tag from your clothing. When you leave the store, the alarm can sound, and you don’t want to be caught. Try to remain composed and give yourself some time before leaving. Don’t worry if the alarm does go off. Simply provide your receipt to the security guard, and they will allow you to go.


You now possess it! These pesky garment security tags may be removed in ten easy steps. Before quitting, try three to four different approaches since one of them will undoubtedly be successful.

I hope this post on how to remove target security tags off clothing was useful for you.

Frequently Asked Questions

How do you remove a target security tag at home?
You will need to place the clothing on your hand as the security tag must be facing up.
Then gently push the fork between the gap of the security tag.
Lastly, to hold the fork and twist the security tag tightly for just a few seconds until it loosens.

How do I remove a security tag that wasn’t removed?

The usage of scissors or screwdriver, or maybe a knife will be helpful for this task. Now place it on the table and position the tag bottom side down on the magnet. You will hear the click. Now manipulate the pin up and down, and it should come out.
Do target security tags make noise?
Yes, the tags will sound an alarm if they are closer to the antennas. It is much easier for the security staff to check if someone is trying to steal something. The antennas are made of to protect the things to be stolen.

Continue Reading
You may also like...

More in Technology

To Top